7 Easy Steps To Build Your own Computer

Saturday, April 10, 2010
7 Easy Steps To Build Your own Computer

Building your own computer is easier today than ever before. Why settle for a PC that you pay to much for and does not have the flexibility of a custom build.

We have a step by step instructional that will help you in building your own computer.



* In order to build your computer you must have the parts. Parts you will need include motherboard, processor, heat sink, ram, power supply, case, hard drive, cd/dvd roms, and thermal paste. Some motherboards come with integrated sound, video, and Ethernet ports. I recommend reading your motherboard user manual to find the specific compatible parts that you will need for your endeavors.

* Installing the motherboard can be a daunting task if you don’t follow the motherboard user manual. It will guide you through all of the jumper settings and instruct you on screwing it into the case. One very important note to remember is use a grounding strap at all times when handling circuit cards and the motherboard! If this step is not followed you could potentially destroy them permanently.

* After the motherboard is installed you must install the motherboard components, you may want to start with the processor and heat sink. Again ground yourself before touching any of the components. Installing the processor is simple for most types of processors. (this applies to most types of processors) All you do is lift up the arm on the processor slot, line up the arrow on the processor with the slot and the push the arm back down. Installing the heat sink isn’t much more difficult. Spread a thin layer of thermal paste on the heat sink and snap it in on top of the processor. Each one snaps in different so refer to the manual for proper installation. Next comes the installing of the ram. It is the easiest step of the process. You open the snaps on the ram slots on the motherboard, line up the notches, and push it down. Too easy.

* The next step in the process is to put in the power supply. This is done by first screwing it into the case. Then you plug in the power cables into the motherboard. Usually it has a 20 pin connector and a 4 pin that plug straight into the motherboard. The other power connectors will be connected when the cd/dvd ROMs and hard drive are installed.

* In order to make your computer function properly you will need to install the hard drives and the cd/dvd drives precisely by the operator manual. Usually it is just screw them in and plug it up but that can sometimes differ. Depending on whether or not you are using IDE or Sata devices the power cables and data cables hook up differently.

* Now just about all of the hardware installation is complete. You just have to install any add in cards you may have. For example sound card, modem or maybe a video card. Pretty much all of these cards just push in. You line up the card with the empty slot and push in it. But remember if you are having problems refer to the user manual.

* We have just the last step left before your pc is up and running. That is giving it the software it needs to run. Installing the operating system is just click the next button. Literally while you are installing the os screens popup and you click next. For more detailed information refer to the operating system manual. It will give you a graphical representation for the installation. When you have finished installing the os you need the drivers for the system. A cd usually comes with the parts. After they are installed your pc should be up and running.



Article Source : computerknowledgeforyou.com
http://computerknowledgeforyou.com/articles/index.php/tips-about-building-your-own-pc/